Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 44)

Step edit section
44
En
Notes
• You can edit the information of the recorded note in steps. For details,
refer to “Step Recording on the 16-pads” (page 51).
• When a note is recorded, the gap of the timing can be corrected. For
details, refer to “QUANTIZE settings” (page 140).
CHORD mode
You can play chords using the 16-pads.
Playing chords by tapping the 16-pads
1 Hold down the [SHIFT] button and press the [SCALE] button.
The button flashes in red and the 16-pads switches to Chord mode.
2 Perform by tapping the 16-pads.
The tapped pad lights up in pink and the notes of the chords already set in the
pad are output. The other pads are lit dimly in pink.
• Up to 8 notes can be output at the same time for each track.
• The output note is automatically corrected according to the scale selected in
the Melodic Control function (page 86).
• Up to 5 chords can be output by tapping one pad.
Setting a set number
There are 18 different chord sets available in Chord mode.
1 Hold down the [SHIFT] button and press the [SCALE] button.
The button flashes in red, and the 16-pads lights up in pink or lights dimly.
2 Turn the rotary selector to select a set number.
The set number to be set is shown in [Set No.] on the display.