Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 173)

Additional information
173
En
 The unit cannot be controlled from equipment connected to
the [MIDI IN] terminal.
• See “Connecting the unit to an external MIDI device or a PC/Mac to
play” (page 152).
• Check that the MIDI transmit channel of the transmitting device and
the MIDI receive channel of the receiving device are set correctly.
 Equipment connected to the [DIN SYNC OUT1] or [DIN SYNC
OUT2] terminal set to [OUT] does not work./The unit cannot be
controlled from equipment connected to the [DIN SYNC IN/
OUT2] terminal set to [IN].
• See “Synchronizing the unit and an external DIN SYNC compatible
device to play” (page 160).
 Equipment connected to the [CLOCK OUT] terminal does not
work / The unit cannot be controlled from equipment
connected to the [CLOCK IN] terminal.
• See “Synchronizing the unit with an external CLOCK compatible
device to play” (page 165).
 The [CLOCK IN] terminal cannot be used for [Gate] settings.
• Check that the output setting of the equipment connected to the
[CLOCK IN] terminal is set to V-Trigger. Only the + polarity setting
can be used.
• Check that the output voltage signal of the connected device is 2 V
or more.
• Set [Sync Source] of [Sync Common] setting in the GLOBAL menu
correctly.
 The [CLOCK IN] terminal cannot be triggered with audio
signals.
• Check the volume on the connected equipment.