Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 73)

Step edit section
73
En
COPY/PASTE
If you hold down the [COPY] or [PASTE] button and press the 16-
pads, the following functions can be activated.
• Copying/Pasting for the step
• Copying/Pasting for the pattern
• Copying/Pasting for the note
Copying/Pasting a step
1 Press the [TRIGGER] button, or hold down the [SHIFT] button and
press the [TRIGGER] button.
The 16-pads switches to Trigger mode or CC mode.
2 Hold down the [COPY] button and press the pad that you want to
copy.
The pad that is copied lights up in blue.
• You can copy multiple steps by holding down the beginning pad, then
pressing the end pad all while holding down the
[COPY] button.
3 Hold down the [PASTE] button and press the pad to paste to.
The pad that is pasted lights up in blue.
• If you have multiple steps copied, hold down the [PASTE] button and press
the beginning pad.