Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 119)

Changing the settings
119
En
[CV] setting
You can change the settings of the following terminals.
The default setting is shown with *.
 CV1 Range
Setting value: Hz/V 8V, V/Oct 1V, V/Oct 2V, V/Oct 5V*, V/Oct 10V,
V/Oct
− 5V
Set the [CV OUT1] terminal CV output method and output voltage
range.
Check the CV input specification of the connected equipment and
select an appropriate value.
• Hz/V 8V:
Hz/V method, CV output represents an octave of pitch by doubling
voltage.
The output voltage range is from 1V to 8V (3 octaves).
• V/Oct 1V:
V/Oct method, 1V represents one octave.
The output voltage range is from 0V to 1V (1 octave).
• V/Oct 2V:
V/Oct method, 1V represents one octave.
The output voltage range is from 0V to 2V (2 octaves).
• V/Oct 5V:
V/Oct method, 1V represents one octave.
The output voltage range is from 0V to 5V (5 octaves).