Displaying the current rp set, Displaying the current rp set -63 – HP 3500YL User Manual
Page 167
PIM-SM (Sparse Mode)
Displaying PIM-SM Data and Configuration Settings
Displaying the Current RP Set
The BSR sends periodic RP updates to all Candidate RPs in the domain. These
updates include the set of multicast group data configured on and reported
by all Candidate-RPs in the domain. This data does not include any static-RP
entries configured on any router in the domain. (To view the static RP-set
information for any static-RPs configured on a particular router, you must
access the CLI of that specific router.)
Syntax: show ip pim rp-set [ learned | static ]
Without options, this command displays the multicast group
support for both the learned (elected) Candidate-RP
assignments and any statically configured RP assignments.
learned: Displays only the elected Candidate-RP assignments
the router has learned from the latest BSR message.
static: Displays only the statically configured RP
assignment(s) configured on the router.
ProCurve(config)# show ip pim rp-set
Status and Counters - PIM-SM Static RP-Set Information
Group Address Group Mask RP Address Override
--------------- --------------- --------------- --------
231.100.128.255 255.255.255.255 100.10.10.1
Yes
Status and Counters - PIM-SM Learned RP-Set Information
Group Address Group Mask RP Address Hold Time Expire Time
--------------- --------------- --------------- --------- --------------
231.100.128.0 255.255.240.0 100.10.10.1
150
92
232.240.255.252 255.255.255.252 100.10.10.1
150
92
237.255.248.1 255.255.255.255 100.10.10.1
150
92
239.10.10.240 255.255.255.240 120.10.10.2
150
92
239.10.10.240 255.255.255.252 120.10.10.2
150
92
The static RP-set
applies only to the
current routing switch.
The Learned RP-set is received from the BSR and
includes an aggregation of reports it has received
from all accessible candidate-RPs in the domain.
The Yes override
indicates that the static-
RP has precedence
over any Candidate-RP
routers for supporting
the indicated group..
Figure 4-24. Listing Both the Learned and Static RP-Set Data
4-63