HP 3500YL User Manual
Page 173
PIM-SM (Sparse Mode)
Event Log Messages
Message
Meaning
Illegal operation in BSR state
An illegal state/event combination has been detected in the
machine
BSR state machine.
Malformed Candidate-RP adv recvd
The switch received a malformed C-RP-advertisement.
from
< ip-addr >
MCAST MAC add for
< mac-addr > failed
The indicated interface could not join the multicast group
for PIM packets.
MCAST flow
< src-ip-addr >,
A multicast flow has been dropped due to low resources
< multicast-addr > not rteing (rsc low)
Multicast Hardware Failed to
The multicast hardware cannot be enabled.
initialize
No IP address configured on VID
< vid-# >
An IP address is not configured for the indicated interface
enabled with PIM.
No route to source/rp
< ip-addr >
PIM was unable to find a route to the specified IP address.
No RP for group
< ip-addr >
PIM-SM needed an RP for the indicated group address, but
none was found.
Inconsistent address and mask
The group prefix needs a route/mask entry, for example, if
you want, 224.x.x.x/4, you input 224.0.0.0/4.
Pkt dropped from
< ip-addr > <reason>,
Received a packet from the indicated IP address and VLAN,
vid
< vid-# >
and dropped it.
Pkt rcvd with a cksum error from
A packet arrived from the indicated IP address with a
< ip-addr >
checksum error.
PIM socket error
There was an error regarding the PIM socket, either on a
sockopt call or a recvfrom call.
Rcvd pkt ver#
< # >, from < ip-addr >,
Received a packet from the indicated IP address with the
expected
< # >
wrong PIM version number.
Rcvd pkt from rtr
< ip-addr >, unkwn pkt
Unknown PIM packet type received from the indicated IP
type <
pkt-type>
address.
Rcvd hello from
< ip-addr > on vid
A misconfiguration exists between the routers.
< vid-# >
Rcvd incorrect hello from
< ip-addr >
An incorrect HELLO packet was received from the indicated
IP address.
Rcvd unkwn opt
< # > in <pkt-type> pkt
A PIM packet with an unknown option number was received
from
< ip-addr >
from the indicated IP address.
4-69