HP 3500YL - Manual (Page 169)

PIM-SM (Sparse Mode)
Displaying PIM-SM Data and Configuration Settings
Displaying Candidate-RP Data
Displaying the Router’s Candidate-RP Status
and Configuration
Syntax: show ip pim rp-candidate [ config ]
rp-candidate: Lists the current Candidate-RP status and, if the
status is enabled for C-RP operation, includes the current C­
RP configuration on the router.
rp-candidate config: Lists the current Candidate-RP status and
the current C-RP configuration on the router, regardless of
whether C-RP operation is currently enabled.
ProCurve(pim)# show ip pim rp-candidate
This system is not a Candidate-RP
Figure 4-27. Example Listing for a Router that is Not Configured as a C-RP
ProCurve(pim)# show ip pim rp-candidate config
Status and Counters - PIM-SM Candidate-RP Information
C-RP Admin Status : This system is not a Candidate-RP
C-RP Address : 120.10.10.2
C-RP Hold Time : 150
C-RP Advertise Period : 60
C-RP Priority : 192
C-RP Source IP VLAN : 120
Group Address Group Mask
--------------- ---------------
239.10.10.240 255.255.255.252
Example of a Candidate-RP
configuration for supporting
multicast groups in the range of
239.10.10.240 to 239.10.10.243.
Indicates that this
router is not enabled
for C-RP operation.
Status Line
Configuration
Figure 4-28. Example of the Full Candidate-RP Configuration Listing
4-65