HP 3500YL - Manual (Page 172)

PIM-SM (Sparse Mode)
Event Log Messages
Event Log Messages
Message Meaning
< multicast-addr >/< mask > Inconsistent The mask entered for the specified multicast address does
address and mask.
not specify sufficient bits to include the nonzero bits in the
mask.
< pkt-type> pkt, src IP < ip-addr > vid < vid- A PIM packet was received that doesn't have a neighbor.
# > (not a nbr)
Bad <parameter-name> in < pkt-type> pkt The PIM packet was dropped due to a bad parameter in the
from IP < ip-addr > packet from the IP address shown.
BSM send to < ip-addr > failed A BSM (Bootstrap Message) send failed. The IP address
shown is the BSM destination address.
Candidate BSR functionality disabled Candidate BSR functionality has been disabled.
< pkt-type>
Candidate RP functionality disabled Candidate RP functionality has been disabled.
C-RP advertisement send to < ip-addr > A C-RP advertisement send failed. The IP address shown is
failed the destination address of the message.
Enabled as Candidate BSR using Candidate BSR functionality has been enabled at the
address: < ip-addr > indicated IP address.
Enabled as Candidate RP using Candidate RP functionality has been enabled at the
address: < ip-addr > indicated IP address.
Failed alloc of HW < flow> for flow Hardware resources are consumed and software routing is
< src-ip-addr >, < multicast-addr > being done for the flow.
Failed to initialize < pkt-type> as a The IP address manager PIM callback routine failed to
call back routine initialize.
Failed to alloc a < pkt-type> pkt (vid Allocation of a packet buffer failed message.
< vid-# >)
I/F configured with IP < ip-addr > on The IP address on the PIM interface has changed to the
vid < vid-# > indicated address.
I/F removal with IP < ip-addr > on vid The PIM interface has been removed due to IP address
< vid-# > removal or change of the indicated IP address.
4-68