Displaying ospf route information -119, Displaying ospf route information – HP 3500YL User Manual
Page 293
IP Routing Features
Configuring OSPF
Displaying OSPF Route Information
To display OSPF route and other OSPF configuration information, enter
show
ip ospf at any CLI level:
ProCurve# show ip ospf
OSPF Configuration Information
OSPF protocol : enabled
Router ID : 10.0.8.35
Currently defined areas:
Stub
Stub
Stub
Area ID
Type Default Cost Summary LSA Metric Type
--------------- ------ ------------- ------------ --------------
-
backbone normal 1 don't send ospf metric
10.3.16.0 normal 1 don't send ospf metric
10.3.32.0 normal 1 don't send ospf metric
Currently defined address ranges:
Area ID LSA Type IP Network Network Mask
Advertise
--------------- ---------- --------------- --------------- ---------
10.3.16.0 Summary
10.3.16.0 255.255.255.0 yes
OSPF interface configuration:
Admin
Authen
IP Address Area ID
Status
Type Type
Cost Pri
--------------- --------------- -------- ----- ------ ----- ---
10.3.2.35 backbone enabled BCAST none 1
1
10.3.3.35 backbone enabled BCAST none 1
1
10.3.16.35 10.3.16.0 enabled BCAST none 1
1
10.3.32.35 10.3.32.0 enabled BCAST none 1
1
OSPF configured interface timers:
Transit Retransmit Hello Dead
IP Address
Delay Interval Interval Interval
--------------- ------- ---------- --------- ----------
10.3.2.35
1
5
10 40
10.3.3.35
1
5
10 40
10.3.16.35
1
5
10 40
10.3.32.35
1
5
10 40
OSPF configured virtual interfaces:
Authen Xmit Rxmt Hello Dead
Area ID Router ID
Type
Delay Intvl Intvl Interval
--------------- --------------- ------ ------ ------ ------ ----------
10.3.16.0 10.0.8.33
none
1
5
10
40
10.3.16.0 10.0.8.36
none
1
5
10
40
Figure 5-54.Example of Output for Show IP OSPF
5-119