HP 3500YL - Manual (Page 374)

Virtual Router Redundancy Protocol (VRRP)
Displaying VRRP Configuration and Statistics Data
ProCurve(config)# show vrrp
VRRP Global Statistics Information
VRRP Enabled : Yes
Protocol Version : 2
Invalid VRID Pkts Rx : 0
Checksum Error Pkts Rx : 0
Bad Version Pkts Rx : 0
VRRP Virtual Router Statistics Information
Vlan ID : 22
Virtual Router ID : 1
State : Initialize
Up Time : 64 mins
Near Failovers statistic displayed
Virtual MAC Address : 00005e-000101
Master's IP Address :
Associated IP Addr Count : 1 Near Failovers : 0
Advertise Pkts Rx : 0 Become Master : 0
Zero Priority Rx : 0 Zero Priority Tx : 0
Bad Length Pkts : 0 Bad Type Pkts : 0
Mismatched Interval Pkts : 0 Mismatched Addr List Pkts : 0
Mismatched IP TTL Pkts : 0 Mismatched Auth Type Pkts : 0
Figure 6-17. Example of the show vrrp Command with Statistics
Debug Command with VRRP Option
The vrrp option with the debug command turns on the tracing of the incoming
and outgoing VRRP packets.
Syntax: [no] debug vrrp
Display VRRP debug messages.
6-44