Introduction – HP 3500YL User Manual

Page 65

Advertising
background image

PIM-DM (Dense Mode)

Introduction

Introduction

Feature

Default

Menu

CLI

Web

Configure PIM Global

n/a

3-12

Configure PIM VLAN Interface

n/a

3-15

Display PIM Route Data

Disabled

3-23

Display PIM Status

0 (Forward All)

3-28

In a network where IP multicast traffic is transmitted for multimedia applica­
tions, such traffic is blocked at routed interface (VLAN) boundaries unless a
multicast routing protocol is running. Protocol Independent Multicast (PIM)
is a family of routing protocols that form multicast trees to forward traffic
from multicast sources to subnets that have used a protocol such as IGMP to
request the traffic. PIM relies on the unicast routing tables created by any of
several unicast routing protocols to identify the path back to a multicast
source (reverse path forwarding, or RPF). With this information, PIM sets up
the distribution tree for the multicast traffic. The PIM-DM and PIM-SM proto­
cols on the switches covered by this manual enable and control multicast
traffic routing.

IGMP provides the multicast traffic link between a host and a multicast router
running PIM-DM or PIM-SM. IGMP and either PIM-DM or PIM-SM must be
enabled on VLANs whose member ports have directly connected hosts with
a valid need to join multicast groups.

PIM-DM is used in networks where, at any given time, multicast group mem­
bers exist in relatively large numbers and are present in most subnets. PIM­
SM (described in Chapter 4 of this guide) is used in networks where multicast
sources and group members are sparsely distributed over a wide area and can
result in unnecessary multicast traffic on routers outside the distribution
paths needed for traffic between a given multicast source and the hosts
belonging to the multicast group. In such networks, PIM-SM can be used to
reduce the effect of multicast traffic flows in network areas where they are
not needed. And because PIM-SM does not automatically flood traffic, it is a
logical choice in lower bandwidth situations such as WAN environments.

3-3

Advertising