HP 958-000290-000 - Manual (Page 38)

2-12 edge switch 2/32 installation guide
Installing and Configuring the Edge Switch 2/32
2. Connect the remaining end of the Ethernet cable to the LAN as follows:
a. If the switch is installed on a customer-supplied LAN segment, connect the
cable to the LAN as directed by the customer’s network administrator.
b. If the switch is installed on the HP-supplied Ethernet hub, connect the cable to
any available port on the hub.
3. Perform one of the following steps:
• If an HAFM server or customer-supplied server platform is delivered and
available, the Ethernet LAN segment does not require connection to the
internet. Go to “
Task 5: HAFM Server (Optional) ” on page 2–12.
• If an HAFM server is not available and the switch is managed through the
EWS interface, attach the Ethernet LAN segment to an internet connection
and go to “
Task 15: Configure the Switch from the Embedded Web Server
(Optional) ” on page 2–51.
Task 5: HAFM Server (Optional)
To run HAFM software, you must set up and configure the HP OmniBook 6000/62000
notebook PC to function as an HAFM server.
Refer to the hp StorageWorks HAFM server installation guide for instructions on:
• Setting up the HAFM server
• Connecting the HAFM server to the LAN
• Configuring the network addressing for the HAFM server
• Setting HAFM server date and time
• Creating HAFM user names and passwords