HP 958-000290-000 - Manual (Page 70)

2-44 edge switch 2/32 installation guide
Installing and Configuring the Edge Switch 2/32
2. Click New. The New Threshold Alert dialog box displays, as shown in
Figure 2–30 .
Figure 2–30: New Threshold Alerts dialog box—first screen
3. Enter a name from one to 64 characters in length. All characters in the ISO
Latin-1 character set, excluding control characters, are allowed.
4. Select one of the following options from the drop-down list under the Name field:
• Rx Throughput. An alert will occur if the threshold set for receive
throughput is reached.
• Tx Throughput. An alert will occur if the threshold set for transmit
throughput is reached.
• Rx or Tx Throughput. An alert will occur if the threshold set for either
receive or transmit throughput is reached.