MRV Communications TERESCOPE TS800/155 - Manual (Page 12)

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l
2
S (for SingleMode)
‘U’ represents operating wavelength.
Instead of U use one of the following:
8 (for 850 nm)
3 (for 1310 nm)
5 (for 1550 nm)
‘W’ represents connector type.
Instead of W use one of the following:
C (for SC)
T (for ST)
‘FET’ (Fast ethernet) represents 100Base-TX with RJ45 connector
‘V’ represents existence/absence of Fusion.
Instead of V use one of the following:
V designates no built-in Fusion option.
F designates built-in Fusion option (only in TS800).
‘S’ represents power supply type.
Instead of S use one of the following:
S (for input to the power supply in the range 100-240 VAC)
3 (for input to the power supply in the range 24-60 VDC)
Examples
1 - TS155/A/M3C/VS means TS700/155 :1-155Mbps link, Multimode, 1310
nm, SC interface, 100-240 VAC power supply.
2 - TS155/C2/S3T/F3 : TS800/155 :1-155Mbps link, Singlemode, 1310 nm,
ST interface, built-in Fusion option, 24-60 VDC power supply.
General Description and explanations
1. Front
Each TereScope head comprises a receiver, 1 transmitter and an interface on the
rear panel for connection to the peripheral equipment see Figure 1.1.
Figure 1.1: Front View
Front view
Showing the receiver
side, the transmitters and
the telescope
Telescope
Transmitter Receiver
CAUTION!
AVOID EXPOSURE –
INVISIBLE LASER
RADIATION IS EMITTED
FROM THIS APERTURE