MRV Communications TERESCOPE TS800/155 - Manual (Page 45)

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l
35
2- Mounting the accessories
) Horizontal surfaces (parapet, ...):
Figure 5.11: TereScope Detached from the Aiming Head
G2 (x2)
JMP-L
Aiming Head
Figure 5.12: Aiming Head Cradle for TereScope Head
CAUTION!
Do not loosen Screws
M (x8).
F2 (x2)
N: Grounding
screw on TS
There are three directional positions
for the TereScope mounting on
the JMP-L plate:
It is possible to mount the
TereScope at -60 or +60 degrees
from the standard position
Standard position : A
+/- 35 `
C
B
Aiming Anchor (L)
Additional possible
location for
Aiming Anchor Additional
possible location
for Aiming
Anchor
Figure 5.13a: JMP-L mounting positions
L2