MRV Communications TERESCOPE TS800/155 - Manual (Page 48)

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l
38
Note
The Tower Mount and the Clamping Plate are not provided with the
equipment and should be supplied by the installer.
3- Attachment of the Transceiver (TereScope Head)
After securely attaching JMP-L to the mounting surface choose one of the three
possible directions for installation of the Alignment Kit (Standard A, B or C)
depending on the location of the transceiver at the opposite side. Mount the aiming
anchor (I) in accordance with the chosen direction.
Mount the Transceiver attached to the mounting bracket front face oriented
towards the opposite site using the provided screws (F1, G1). Tighten firmly these
screws.
Bolt for the attachment of
the Alignment Bracket to
the JMP
Figure 5.17: Alignment kit mountedon JMP-L – Back view