MRV Communications TERESCOPE TS800/155 - Manual (Page 15)

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l
5
B. TS800/155 Standard Model
The TS800/155 supports most of the prevalent protocols in the 34-155 Mbps
range. Support for a special protocol, which is not on the list, can be ordered after
coordination with the factory. This model can be used for Open Protocol
applications which ensures complete transparency (including all data in the
range of 1-155 Mbps.) In this case, a maximum 2 dB of the power budget is lost.
Back Panel Description
Table 3: TS800/155 Standard Model Back Panel Controls, Interfaces, and Indicators
Power Power source Terminal Block (Main or UPS).
AC power supply (100 to 240 Vac) or DC power
supply (24 to 60 Vdc)
Fiber optic Fiber Optic interface for connection to the
peripheral equipment. The standard interface is MM
1310nm SC connector; other interfaces are available
upon request.
In model TS800/155-F with the fusion option, there
are two fiberoptic interface ports for connection to
the Fusion system; one primary and the other
redundant.
Remote monitor Connection to the RSM. (The RSM has to be
ordered separately)
Connectors
Management
Connection to 10Base-T SNMP management
interface. Pins 1,2: TX and 3,6 RX.
Pins (4,5) and (7,8) of this connector can be used
for dry contact purposes, for Airlink flag and F/O
flag alarms respectively
Figure 1.3: TS800/155 Standard Model Panel Schematic