Ab c – MGE UPS Systems GALAXY PW 225KVA User Manual
Page 26
2.2
Unpacking
1.
Remove the packing box and the document holder on the top of the cabinet; raise the cabinet.
2.
Dismantle the blocks fixed beneath the cabinet by M12 screws, see Figure 2-2 (A or B), according to the width
of the cabinet);
3.
Dismantle the 4 M12 screws screwed on the 4 leg supports (C).
4.
Withdraw the "hexagonal spacer + leg" assemblies delivered inside the document holder.
5.
Screw the spacers onto the cabinet frame (C).
6.
Lock these spacers in position using a 24 mm flat wrench, and fit the cabinet on its legs.
7.
Adjust cabinet height and verticality by screwing or unscrewing the legs using a 13 mm flat wrench.
Figure 2-2: Dismantling Leg Supports and Attaching Spacers to Cabinet.
Galaxy PW™ UPS 100 to 225kVA
System Setup
2 — 4
86-133060-00 A00
A
B
C