MGE UPS Systems GALAXY PW 225KVA - Manual (Page 89)

Installation and User Manual
Appendix B
Monitoring - Electrical Supervision Options
"Teleservice"
"Teleservice" is a contract offering continuous remote supervision and maintenance of UPS systems via a modem.
Real-time communication is established with our "Teleservice" centre for communication of all alarms and events
occurring in the installation.
Utilization Via Teleservice
When the optional JBUS RS232/485 communications board is installed, the time-stamped information can be sent
to the Teleservice center.
The center can remotely consult the same information and carry out the same modifications as the user locally on
the display. Note that only the Teleservice centre can reset the counters for the statistical data.
GTC Board
This electronic board provides user access to the J-Bus communications protocol. Using the data and address
tables provided, the user can customize his installation.
GTC + Software
The user has access to the J-Bus protocol and, in addition, the associated software acquires system parameters
(measurements, status conditions) and transforms them into diagrams, alarm messages and tables. With the click
of a mouse, the user can locally or remotely supervise the UPS system (comprising one or many UPS units).
Appendices A — 11 86-133060-00 A00