MGE UPS Systems GALAXY PW 225KVA User Manual
Page 30
2.6
General Instructions for Screens
To display the desired information and enter commands using the
▲
,
▼
and
ø keys:
1.
Press the
key to exit the time-stamping consultation mode and return to the main menu. If no commands
are entered for five minutes, the system automatically returns to the normal display mode.
To scroll through the screens displaying information:
1.
Press the
▲
and
▼
keys to scroll up and down through the screens.
For time-stamped events, the display begins with the last event logged. To access older events, press the
▼
key.
If during consultation, you wish to review more recent events, press the
▲
key.
2.6.1
Control Panel Indicators and Definitions
The control panel on the Galaxy PW
™
UPS comprises the basic controls and indications required to check the
general status of the system. See Figure 2-6.
Located in the upper right part of the cabinet front, the control panel is designed to provide an easy and rapid
overview of system status. See Figure 2-6.
Interpretation of symbols is very simple and requires no particular training. The information concerns only the
cabinet on which the panel is located. Refer to Appendix A for a complete List of Primary and Secondary display
messages.
The panel indicates:
◗
Normal operation (load protected).
◗
Operation with load on battery power.
◗
Abnormal situations (operating problem).
◗
Dangerous situations (load not protected).
Figure 2-6: Control Panel Indicators.
1
2
VA
W.Hz
fault
18
17
8
7
6
4
3
5
2
1
22
21
19
20
16
9
10
11
12
13
15
14
15
Galaxy PW™ UPS 100 to 225kVA
System Setup
2 — 8
86-133060-00 A00