MGE UPS Systems GALAXY PW 225KVA User Manual
Page 66
4.13
Setting the Date and Time for the UPS - Utilization Via the Galaxy PW™ Display
The time and date can be set for the UPS via the main menu on the display (see below), using the DATE AND TIME
command. The time-stamping information, statistics and measurement records are also available via the same
menu, using the PAST EVENTS command.
Simply select the desired command with the ">" sign that can be moved using the
▲
and
▼
keys. The selected
command can be confirmed by pressing the
key.
When the DATE AND TIME command is selected, the date and time is displayed in the order of year, month, day,
hours, minutes, and seconds. When you leave this command, the date and time is displayed in the reverse order.
The current values are automatically displayed.
Modify any of the displayed values by:
1.
Position the ">" sign opposite the value to be modified. Then press the
ø key.
2.
Use the
▲
and
▼
keys to modify the value.
3.
Use the
▲
key to increment the value by one.
4.
Use the
▼
key to decrement the value by one.
The selected value can be confirmed by pressing the
ø key. A second value may then be selected for
modification, again using the
▲
and
▼
keys. Modifications are made and confirmed value by value.
5.
Press the
key at any time to exit the DATE AND TIME function.
That is the only means to leave the function. If no modifications to values are confirmed, exiting the function
corresponds to cancelling the request.
DATE AND TIME SETUP
> YEAR
1997
MONTH
9
DAY
8
HOURS
8
MINUTES
11
SECONDS
42
▲ ▼
Galaxy PW™ UPS 100 to 225kVA
Operation
4 — 18
86-133060-00 A00