Emc (electromagnetic compatibility) – Mocomtech CDM-QX User Manual

Page 20

Advertising
background image

CDM-Qx Multi-Channel Satellite Modem with DoubleTalk Carrier-in-Carrier

Revision 7

Preface

MN/CDMQX.IOM

xviii

International Symbols

Symbol

Definition

Symbol

Definition

~

Alternating Current

Protective Earth

Fuse

Chassis Ground

CDM-Qx/QxL AC Modem Installation: The installation and connection to the line supply must
be made in compliance to local or national wiring codes and regulations. The CDM-Qx/QxL is
designed for connection to a power system that has separate ground, line and neutral conductors.
The equipment is not designed for connection to a power system that has no direct connection to
ground.

CDM-Qx/QxL DC Modem Installation: The CDM-Qx/QxL DC input is connected to a nominal
48 VDC prime power source. The DC input is isolated from the chassis and from the DC output to
the BUC if equipped with internal BUC power supply. The chassis may be connected to a local
system ground using a separate wire to the ground stud on the back of the chassis. Since the DC
input is isolated, either the positive or the negative side of the DC input may be common with local
ground. Labeling on the chassis rear panel indicates the positive and negative terminals of the input
power socket.

Telecommunications Terminal Equipment Directive

In accordance with the Telecommunications Terminal Equipment Directive 91/263/EEC, this
equipment should not be directly connected to the Public Telecommunications Network.

CE Mark

Comtech EF Data declares that the CDM-Qx/QxL Multi-Channel Satellite Modem meets the
necessary requirements for the CE Mark.

RoHS Compliancy

This unit satisfies (with exemptions) the requirements specified in the European Union Directive on
the Restriction of Hazardous Substances, Directive 2002/95/EC, (EU RoHS).

EMC (Electromagnetic Compatibility)

In accordance with European Directive 89/336/EEC, the CDM-Qx/QxL Modem has been shown,
by independent testing, to comply with the following standards:

Emissions:

EN 55022 Class B - Limits and methods of measurement of radio
interference characteristics of Information Technology Equipment.

(Also tested to FCC Part 15 Class B)

Advertising