Mocomtech CDM-QX - Manual (Page 218)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Appendix B MN/CDMQX.IOM
B–6
Press
ENTER
or
CLEAR
to return to the previous menu, and re-enter the code. If the problem
persists, contact Comtech EF Data Customer Support for further assistance.
B.2.4.2 Entering the Installed Module FAST CODE
Having selected MAIN MENU: Utility Æ FAST Æ Slot# (where # denotes the selected Slot#1,
Slot#2,Slot #3 orSlot #4):
FAST - Slot#1: Mod Turbo
(▲ ▼,ENT)
Depending on the type of module (modulator or demodulator) that has been installed into the
chosen Slot, select Mod or Demod using the
◄ ► arrow keys, then press
ENTER
.
FAST: Config View
Board S/N: 223456789 (Mod#1)
Select Config using the ◄ ► arrow keys, then press
ENTER
.
FAST Configuration:
Edit Code Demo Mode
Select Edit Code using the ◄ ► arrow keys, then press
ENTER
.
Edit 20 digit FAST Code:
00000000000000000000 (ENT)
Enter the 20-digit FAST code that was obtained from Comtech EF Data carefully. The procedure
and user prompts are identical to those outlined for the Base Unit FAST Code entry.
B.2.4.3 Entering the Installed Module TPC Board FAST CODE
Having selected MAIN MENU: Utility Æ FAST Æ Slot# (where # denotes the selected Slot#1,
Slot#2,Slot #3 orSlot #4):
FAST - Slot#1: Mod Turbo
(▲ ▼,ENT)
Typical for either a modulator or demodulator module, select Turbo using the ◄ ► arrow keys,
then press
ENTER
.
FAST: Config View
Board S/N: 423456789 (TPC#1)
Select Config using the ◄ ► arrow keys, then press
ENTER
.
FAST Configuration:
Edit Code Demo Mode
Select Edit Code using the ◄ ► arrow keys, then press
ENTER
.
Edit 20 digit FAST Code:
00000000000000000000 (ENT)
Enter the 20-digit FAST code that was obtained from Comtech EF Data carefully. The procedure
and user prompts are identical to those outlined for the Base Unit FAST Code entry.