Japan Tiger 7100e+ - Manual (Page 103)

User Manual 103
English
Configuration items
For the details of each item, refer to “Contents of the Fast
EtherNet settings” (Page 131).
The configurable items may vary from one printer to
another.
Network Connection Configuration of the Network Basics
Protocol Option
Set “Enable” or “Disable”
for each protocol.
Frame Options
Set the frame type of the
network.
DHCP/BOOTP
If the IP address is
automatically obtained
using a DHCP/BOOTP
server, set “Enable”. If a
direct IP address is typed
in, set “Disable”.
RARP
If the IP address is automatically obtained using a RARP
server, set “Enable”. If a direct IP address is typed in, set
“Disable”.
IP Address, Subnet Mask, Default GateWay
Type in the IP address, subnet mask and gateway
allocated to the Fast EtherNet, with 10 digits each
“***.***.***.***”. If a DHCP/BOOTP server or RARP
server is used, there is no need to configure the settings.
TCP/IP Settings Configuration of the TCP/IP protocol
7100e+.p65 25/08/99, 20:52 PM 103