Japan Tiger 7100e+ - Manual (Page 27)

User Manual 27
English
Setting up the printer software
Next, set up the printer software. After adding the printer driver
in Windows98/95 as the “Default local printer”, perform the
setup.
Set up the OKI LPR utility on a hard disc drive with
ample free space. If there is insufficient free space
on the hard disc, attempting to print a large volume
of data or too many print jobs may cause failure of
the data spool and the printer may fail to print.
In the following explanation, setting up OKIPAGE 8c(PS) as the
printer in Windows98 is used as an example.
Please have ready the “Fast EtherNet’s companion network
software CD-ROM”.
1. Set up the printer driver as the “Default local printer”.
Please refer to the your printer’s user manual for instructions
on how to set up your printer driver.
2. Insert the “Fast EtherNet’s companion network software CD-
ROM” into the computer.
The Setup Utility starts automatically and is exited by
clicking on “Exit”.
3. Click on the “Start” button and select “Run”.
7100e+.p65 25/08/99, 20:49 PM 27