Japan Tiger 7100e+ - Manual (Page 44)

Fast Ethernet 7100e+ 44
4 Select [LPR Port] and click [New Port].
• Do not select any port other than [LPR Port].
• [Apple Talk Printing Device] is available only for
PostScript. It cannot be used for any other than a
PostScript driver.
6 Press “Cancel” on the printer driver has already been
installed.
7 Select a printer model, right mouse click, and then click on
“Properties”.
5 Enter [Printer IP Address] and [Printer Queue Name].
Enter [Ip] for the printer queue name. With any other name,
printing will not be carried out properly.
Click [OK] and [Close] to return to the Printer Wizard window,
then click [Next].
8 Click on the “Ports” tab.
9 Check the box next to the port that was added previously.
Click “OK”
Print from the added printer via application software.
7100e+.p65 25/08/99, 20:50 PM 44