Japan Tiger 7100e+ - Manual (Page 132)

Fast Ethernet 7100e+ 132
5 Follow the instructions on the screen to configure the Fast
EtherNet. 6 Check the setting details. If the settings are correct, click [Run].
The new settings will be transmitted to the Fast EtherNet.
For creating NetWare queues and so on, it is
necessary to add NetWare Client32 or IntranetWare
Client to the PC.
At this point, the Fast EtherNet is still operating with
the previous settings.
7 Click [Finish] to make the new settings take effect.
You may need to switch the printer, depending on the
model, off and then back on again.
7100e+.p65 25/08/99, 20:55 PM 132