Japan Tiger 7100e+ - Manual (Page 54)

Fast Ethernet 7100e+ 54
1. Log in as root on the workstation.
If it is not possible to log in with super-user
authorization, leave the configuration to the network
manager.
2. Using the APR command, set a temporary IP address on the
Fast EtherNet.
Example: In the case that the IP address is “192.168.20.127”,
the Fast EtherNet address is “00:80:92:01:00:D2”
# arp –s 192.168.20.127 00:80:92:01:00:D2 temp
The EtherNet address (MAC
Address) is displayed in the
print menu of the printer.
3 Use the ping command to confirm the connection with the
Fast EtherNet.
Example: If the IP address is “192.168.20.127”, [type]
#ping 192.168.20.127
If there is no reply, then there is a problem with the
configuration of the Procedure 2 IP address or with
the condition of the network. Please consult your
network manager.
OKIPAGE 8C
7100e+.p65 25/08/99, 20:50 PM 54