English – Japan Tiger 7100e+ User Manual
Page 41
Advertising
User Manual
41
English
8.
Choose the “OKI Device Setup” in the “Setup” menu.
(4) After a while, the Fast EtherNet is displayed in the list.
Select the Fast EtherNet displayed and choose the “OKI
Device Setup” in the “Setup” menu.
If the Fast EtherNet is not displayed, click on the “OKI
Device search” button.
<In case that TCP/IP protocol is the only working protocol>
(1) When the next message is displayed, click on “Yes”.
(2) Type in the EtherNet address and the “IP address”
which configured it, and click on “OK”.
(3) Click on “Yes” in order to validate the values set.
7100e+.p65
25/08/99, 20:50 PM
41
Advertising