Japan Tiger 7100e+ User Manual
Page 138
Fast Ethernet
7100e+
138
EtherTalk setup screen
Printer port setup screen
1
Set whether EtherTalk is used.
2
If you want to move your printer to a different zone, enter
the new zone name.
3
Enter a new printer name to change the printer name used by
Chooser.
1
This is the character string transmitted to the printer before
and after sending print data to the direct the output port (lp).
2
This is the character string transmitted to the printer before
and after sending print data to the output port via a Kanji
filter (sjis or euc).
3
Fixed as PS
4
Enter the tab size, page width and page length for the output
port via a Kanji filter (sjis or euc).
[Kanji Conversion Output Settings] are available
only for postscript printers.
5
Set whether a banner page is printed. This item is valid only
for TCP/IP protocol.
7100e+.p65
25/08/99, 20:55 PM
138