Japan Tiger 7100e+ - Manual (Page 82)

Fast Ethernet 7100e+ 82
Creating a printer controlled by the Printer Server
1 Select the print server you generated (“8C-PSERVER”) and
press the Enter key.
Print Servers
8C-PSERVER
2 Select [Printers] and press the Enter key.
Print Server Information
Printers
Information and Status
User
Operator
Service Network Server
Description
Password
Monitor
3 Press the Ins key to input the printer name to be created
(“OP8C” in this example), then press the Enter key.
Printer Name: OP8C
“OP 8C” is created.
Allocating Print Queues to Printers
1 Select the printer you have created (“OP8C”)and press the
Enter key.
Pre-defined Printers No. Status
OP8C 0 [c]
2 Select [Banner Type], then press the Enter key.
3 Choose [Text] or [PostScript] and press the Enter key.
Available Banner Types
Text
PostScript
4 Select [Print Queues Assigned], then press the Enter key.
5 Press the Ins key, select the print queue you have created
(“Q-8C”) from [Available Print Queues], then press Enter.
6 Input a priority value of “1” for the print queue and press the
Enter key.
NetWare Server\Print Queue Priority Status
SOFT22-NW4•Q-8C 1 [c]
The print queue is allocated.
7 Press the ESC key until [Save changes?] is displayed. Select
[Yes], then press the Enter key.
7100e+.p65 25/08/99, 20:51 PM 82