Japan Tiger 7100e+ - Manual (Page 97)

User Manual 97
English
6 Enter the remote printer name (“OP8C”) in the [Name]
column.
Environment Settings for Printer 0
Name: OP8C
Type: Pre-defined
Identifier by Company:
IRQ:
Buffer Size (K bytes):
Paper for Starting:
Queue Service Mode:
Baud Rate:
Data Bit:
Stop Bit:
Parity:
X-On/X-Off Worked or Not Worked
7 Select [Type] and press the Enter key. [Printer Type] is
displayed. Select [Remote Parallel, LPT1], then press the
Enter key.
Printer Type
Local Parallel, LPT1
Local Parallel, LPT2 Local Parallel, LPT3
Local Serial, COM1
Local Serial, COM2
Local Serial, COM3
Local Serial, COM4
Remote Parallel, LPT1
Remote Parallel, LPT2
Remote Parallel, LPT3
8 Press the Esc key until [Save changes?] is displayed, then
select [Yes] and press the Enter key.
The printer “OP8C” is generated on printer no. 0.
7100e+.p65 25/08/99, 20:51 PM 97