English – Japan Tiger 7100e+ User Manual
Page 119
User Manual
119
English
6
Select the Fast EtherNet to set up from the Ethernet address
list. Then select [OKI Device Setup] from the [Setup] menu.
•
If you are using IPX/SPX protocol, the Fast EtherNet
may not be listed if there are many NetWare file servers.
In this case, select [Environment Setup] from the
[Options] menu, then [NetWare] tab to register the IPX
network address where the Fast EtherNet is located.
Then search for the address again.
•
The Ethernet address is displayed in the Fast EtherNet
self-diagnostics test print.
•
If you are using TCP/IP protocol, the Fast EtherNet
may not be listed if its IP Address has never been
configured. In this case, select [IP Address Setup] from
the [Settings] menu and set the IP Address. Then search
for the address again.
7
Enter the required items and click [Setup].
7100e+.p65
25/08/99, 20:53 PM
119