Japan Tiger 7100e+ - Manual (Page 130)

Fast Ethernet 7100e+ 130
Timeout
Polling Time - Set the time for polling the response from the
Fast EtherNet (in seconds).
Using quick setup utility (Windows)
It is possible to set up the Fast EtherNet from a PC running TCP/
IP or IPX/ SPX using the Quick Setup Utility for Windows
supplied with the Fast EtherNet.
Operating environment
A PC with Windows98/95 or Windows NT Server 4.0/
Workstation4.0, running TCP/IP or IPX/SPX (NetWare).
• Operation on any system other than the above cannot
be guaranteed.
• This utility cannot be used on a PC which cannot be
connected to the network with TCP/IP or IPX/SPX.
• This utility must be used on a PC which is located on
the same segment as the printer.
Timeout - Set the timeout for data transmission between
AdminManager and the Fast EtherNet (in seconds).
Retry Time - Set the number of times to retry data transmission
between Admin Manager and the Fast EtherNet.
7100e+.p65 25/08/99, 20:54 PM 130