Japan Tiger 7100e+ - Manual (Page 75)

User Manual 75
English
4 Activate PCONSOLE.
F:\>pconsole
[Available Options] is displayed.
Available Options
Print Queues
Printers
Print Servers
Quick Setup
Change context
Generating Print Server, Printer and Print Queue
1 Select [Quick Setup] and then press the Enter key.
Available Options
Print Queues
Printers
Print Servers
Quick Setup
Change context
2 The print server name, printer name and print queue name
are automatically generated. Change them as necessary.
Input the print server name [8c-PSERVER], printer name
[P1] and print queue name [Q1-PS].
Set a banner type to suit the printer.
Print Service Quick Setup
Print Server: 8C-PSERVER
New Printer: P1
New Print Queue: Q1-PS
Print Queue Volume: SOFT22-NW4_SYS
Banner Type: PostScript
Printer Type: Parallel
Location: Manual Load
Interruption: Unavailable
(Polling Mode)
Port: LPT1
3 Press the ESC key until [Save changes?] is displayed, select
[Yes], and press the Enter key.
Save changes?
No
Yes
Closing PCONSOLE
1 Press the ESC key until the display shows [Exit?], select
[Yes] and press the Enter key.
Available Options
Exit?
No
Yes
2 Log out from the file server.
F:\>Logout
7100e+.p65 25/08/99, 20:50 PM 75