Japan Tiger 7100e+ - Manual (Page 20)

Fast Ethernet 7100e+ 20
1. Start the “Network” control panel.
2. Open the “Network configurations” tab and confirm that
“TCP/IP
àXXX” is displayed.
If “TCP/IP àXXX” is not displayed, click on “Add”.
3. Select “Protocol” and click on “Add”.
4. Select “Microsoft” and “TCP/IP”, click on “OK”.
5. Select “TCP/IP àXXX”, click on “Properties”.
7100e+.p65 25/08/99, 20:49 PM 20