SATO CL 408e - Manual (Page 106)

Page 6-6
Section 6. Replacement Procedures
SATO CL408e/CL412e Service Manual PN 9001078
Rev. B
Replacing the Main Circuit Board
INDEXING NOTCH
NO NOTCH ON THIS SIDE
FLASH MEMORY MODULE
INSERT THE FLASH MEMORY
MODULE INTO THE MAIN PCB
MEMORY FRAME AT
APPROXIMATELY 45 0 . NOTE THE
INDEXING NOTCH ON THE
MODULE. GENTLY PUSH DOWN TO
SNAP INTO POSITION
INDEXING NOTCHES
APPROXIMATELY
45 0 ANGLE
Figs. 6-6