SATO CL 408e - Manual (Page 160)

Page 9-6
Section 9. Optional Accessories
SATO CL408e/CL412e Service Manual PN 9001078
Rev. B
9.3 Label Dispenser Installation
LABEL DISPENSER KIT
Installation of the optional Label dispenser into the printer adds the convenience of
automatic label dispensing. Each label is printed, then peeled from the backing paper
and presented at the front of the printer for removal by the operator. A photo electric
sensor detects the presence of a completed label and signals the printer to await
removal. Once the completed label is removed, this sensor signals the printer to
automatically backfeed the label stock for correct alignment of the printing on the next
label.
MAGNETIC LATCH
(2) SELF TAPPING
SCREWS
LABEL DISPENSER
SUB-ASSEMBLY
STRIKE PLATE
(2) PAN HEAD
SCREWS
C’SUNK SELF
TAPPING SCREW
BACKING TAKE UP SPINDLE
ASSEMBLY (INCLUDES BELT)
(2) PAN HEAD
SCREWS
PEEL BAR
Fig. 9-9