SATO CL 408e - Manual (Page 170)

Page 9-16
Section 9. Optional Accessories
SATO CL408e/CL412e Service Manual PN 9001078
Rev. B
9.4 PCMCIA Memory Expansion Installation
The Memory PCB Board provides the interface board for (1) PCMCIA memory card slot.
MEMORY PCB BOARD
STANDOFFS SHOWN AS
RECEIVED. STANDOFFS WILL
BE REMOVED AND USED TO
MOUNT MEMORY BOARD TO
THE MAIN PCB BOARD
STANDOFFS SHOWN AS
RECEIVED.
TOP SCREWS MUST BE
REMOVED FOR FASTENING
TO MAIN PCB BOARD
CONNECTOR IS INSTALLED
TO MATING CONNECTOR
ON MAIN PCB BOARD
SLOT FOR MEMORY CARD
OPPOSITE SIDE SHOWN
Applicable Specifications PCMCIA Version 2.1 (JEIDA Version 4.1)
Size Up to 4MB SRAM
Up to 16MB Flash
Connector Pins 68
Battery Approximately two years (manufacturer dependent)
Write Protect Yes
Low Battery Detect Yes
Figs. 9-30