SATO CL 408e - Manual (Page 50)

Page 2-30
Section 2. Configuration
SATO CL408e/CL412e Service Manual PN 9001078
Rev. B
This selection allows the user to select the language used in the LCD menu and error
messages. The selections are English, French, German, Spanish, Italian and Portuguese.
Select LCD Display
Language
STEP PROCEDURE
1. Press the LINE key to advance to the desired language setting.
2. When the setting is correct, press the FEED key to accept the setting
and advance to the next display.
select language
english
This selection allows the user to specify the hexadecimal code for the character which is
replaced with the Euro Character. The default is D5 Hex.
Euro Code
D5
STEP PROCEDURE
1. The underline cusor should be positioned underneath the first digit
selection. Use the LINE key to step to the desired setting.
2. Press the FEED key to advance the underline cursor to the second
digit of the desired hexadecimal code.
3. Press the LINE key to step to the desired setting.
4. When the setting is correct, press the FEED key to accept the setting
and advance to the next display.
euro code
d5
LCD Panel — Service Mode