SATO CL 408e - Manual (Page 44)

Page 2-24
Section 2. Configuration
SATO CL408e/CL412e Service Manual PN 9001078
Rev. B
STEP PROCEDURE
1. Use the LINE key to step the underlined cursor to the desired setting.
IF Yes is selected, the printer will enter the Memory Format mode.
If No is selected, the display will advance to the mode display.
To exit the Card Mode, power off the printer, then back on.
Before a PCMCIA card can be used, it must be formatted.
Note: Formatting a card destroys all data currently stored on the Card.
Card Format
Yes No
STEP PROCEDURE
1. Use the LINE key to step the underlined cursor to the desired setting.
IF Yes is selected, the printer will enter the Card Format mode.
If No is selected, the display will advance to the mode display.
Card format
yes no
card mode
Before the internal Expanded Memory can be used, it must be formatted.
Note: Formatting the memory will destroy any stored data.
Memory Format
Yes No memory format
yes no
LCD Panel — Card Mode