Sharp AR-650 - Manual (Page 108)

104
6. CHANGING AUTOMATIC ENERGY SAVE TIME/ AUTOMATIC SHUTOFF TIME
2
Press the PROGRAM key to enter the
Program menu.
Press the Next key on the PROGRAM
panel to display the panel on the right.
1
2
Press the ENERGY SAVE key on the panel
shown at the top.
. The display on the right appears.
1
Select the desired number on the panel.
To change the Automatic Energy Save time
Press the AUTO SHUTOFF key on the
panel shown at the top.
. The panel on the right appears.
1
Select the desired number on the panel. 2
To exit from the Automatic Energy Save time
To change the Automatic Shutoff time
. Press the ENERGY SAVE key or the START
key.
. The copier starts warming up, then it becomes
ready after a short while.
. Using the Auto Job Start mode is convenient.
See page 17.
To exit from the Automatic Shutoff time
Turn the power switch ON.
. The copier starts warming up, then the
message READY appears after approx.
7 minutes. See page 16.
. Using the Auto Job Start mode is convenient.
See page 17.
1