Sharp AR-650 - Manual (Page 56)

52
14. INTERRUPT COPYING
The Interrupt Copy is a convenient feature that allows the user to pause a job that is currently
being done. This mode allows for a single copy to be made from either the bypass guide or
nominated cassette. Multiple copies are possible by pressing the START key once for every
copy requierd.
1 Press the INTERRUPT key.
The following message appears:
Job interrupted job 1 saved
Replace the original with a new original.
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
. Close the automatic document feeder slowly
after the original size has been detected.
Note: During the interruption, the automatic
document feeder and automatic duplexer
are inoperable.
2
Select the desired copy size, exposure and
reproduction ratio.
4
3
After interrupt copying is finished, press
the INTERRUPT key again.
. This message will appear:
READY to resume job 1
5
Press the START key.
. You can make multiple copies by pressing the
START key once for each copy desired.
Note: Interrupt copying is not available during
scanning of the originals. Press the
INTERRUPT key when the scanning has
completed.
HELP
ENERGY SAVER
TIMER
INTERRUPT
COPY
PRINTER/NETWORK