Sharp AR-650 - Manual (Page 36)

32
When Placing the Original on the Glass
5
6
1
Using the Zoom Keys
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
. Close the automatic document feeder slowly
after the original size has been detected.
Select the desired exposure and copy
quantity.
Press the START key.
Note: If there are sheets of paper set on the sheet bypass, you must press the COPY-SIZE key
corresponding to the size of the sheets. (See page 50.)
Press the cassette of the desired paper size
on the display.
5. REDUCTION AND ENLARGEMENT COPYING (Cont.)
3 Select the desired reproduction ratio using
the ZOOM keys.
. For enlargement, use the UP key. For
reduction, use the Down key.
. Each time you press either ZOOM key, the
reproduction ratio changes by 1%. Holding
down the key changes the reproduction ratio
continuously.
. Pressing the 400% key or the 25% key causes
400% or 25% to be immediately displayed.
. Pressing the 100% key returns the copier to
actual-size copying.
2
Press the ZOOM ORG.
→
COPY key.