Sharp AR-650 - Manual (Page 123)

119
USING THE OPTIONAL FINISHER
5 Press the START key.
. The copies are automatically stapled after
each set has been copied.
. To add more originals, press the CONTINUE
key during the scanning.
6 Stapled copies exit onto the trays.
. When the finisher trays reach maximum
capacity, the following message appears:
Finisher full: Remove paper
Remove the copies from the trays and
press the START key to continue.
. To cancel copying, press the STOP key to
interrupt the copy run, then press the
MEMORY CLEAR key.
. The number of copies you can staple at a time
is shown below.
Letter, Statement-R: 50
Ledger, Legal, Letter-R: 30
. If you set the staple mode and more than
specified number of sheets is copied, the
finisher automatically enters the sort mode.