Sharp AR-650 - Manual (Page 34)

30
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
. Close the automatic document feeder slowly.
When Placing the Original on the Glass
5. REDUCTION AND ENLARGEMENT COPYING (Cont.)
. The sensor unit immediately detects the size
of the original, selects the paper size matched
to the original, and calculates the reproduction
ratio based on the detected original size and
the selected copy size. The reproduction ratio
is then displayed.
. If the following message appears:
Change direction of original ,
change the direction of the original on the
glass.
. If the following message appears:
Use reduction cassette ,
install the correct-sized cassette, and set the
original on the glass again.
5 Select the desired exposure and copy
quantity.
Press the START key.
. Reduced or enlarged copies of the selected
size will be made.
6
Note: The copier may not be able to detect the
following types of originals in the AMS
mode:
. Transparent originals such as OHP film
. Originals with black areas
1 2 3
4 5 6
7 8 9
0 C
ALL CLEAR
STOP
START
CLEAR