Sharp AR-650 - Manual (Page 46)

42
5
Select the desired copy size, exposure and
copy quantity.
. The automatic paper selection mode is set
as the default mode.
4 Place the originals.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The number of originals you can load at a
time is shown below.
Letter, Letter-R, Statement-R : 60
Ledger : 30
Legal
: 35
Press the START key.
. Single-sided copies are output from the copier.
Slides
8. SINGLE-SIDED COPIES FROM TWO-SIDED ORIGINALS (Cont.)
3
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.