Sharp AR-650 - Manual (Page 125)

121
USING THE OPTIONAL FINISHER
9
8 When the last original has finished being
scanned, press the FINISHED key.
. Printing starts.
6 When the first original has finished being
scanned, press the YES key, set the next
original and press the START key.
. You can start scanning by pressing the
START key (you do not need to press the
YES key).
For the next and subsequent originals,
repeat step 6.
7
Copies exit onto the trays.
. When the finisher trays reach maximum
capacity, the following message appears:
Finisher full: Remove paper
Remove the copies from the trays and
press the START key to continue.
. To cancel copying, press the STOP key to
interrupt the copy run, then press the
MEMORY CLEAR key.