Sharp AR-650 - Manual (Page 162)

158
Reinstall the saddle stapler and saddle
stitcher to their previous position.
5
Check that the finisher is attached to the
copier and Ledger, Legal, or Letter-R sized
paper is set.
. If one of these sizes of paper is not set, test
stapling cannot be carried out.
6
Close the lower cover of the finisher.
Test stapling is automatically carried out.
. A blank copy is made automatically.
Note: Repeat steps 1 to 7 if test stapling is not
satisfactorily performed and "Set staple
cartridge" is still displayed.
7
8. REPLACING STAPLES (OPTIONAL) (Cont.)