Sharp AR-650 - Manual (Page 130)

126
7. MAGAZINE SORT & SADDLE STITCHING MODE (Cont.)
1 Perform steps 2 through 5 of the procedure
for "When Using the Automatic Document
Feeder".
When Placing the Original on the Glass
Place the original and press the START
key.
. Place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
. Place the first page of the originals first.
When SADDLE STITCH is selected, if referring
to the illustration on page 124 for example,
set them in the order of pages 12-1, 2-11, 10-
3, 4-9, 8-5, then 6-7.
. Refer to step 6 on page 37 for direction of
originals placed.
2
6
5 When the last original has finished being
scanned, press the FINISHED key.
. Printing starts.
3 When the first original has finished being
scanned, press the YES key, set the next
original and press the START key.
. You can start scanning by pressing the
START key (you do not need to press the
YES key).
For the next and subsequent originals,
repeat step 3.
4
Copies exit onto the trays.
. When the finisher trays reach maximum
capacity, the following message appears:
Finisher full: Remove paper
Remove the copies from the trays and
press the START key to continue.
. To cancel copying, press the STOP key to
interrupt the copy run, then press the
MEMORY CLEAR key.